Name or email:   Password:    
Lost your password? recover it      No account yet? please register  
International sales:   Europe | America | Asia | ROW

Downloads

Downloads Home »  Documents

FilesDate added

Order by : name | date | hits [ ascendent ]
file icon DesignBuilder Printable Documentation v4 (A4 pages)
15.07.2015

Please bear in mind that there are over 800 pages before you decide to print this!

Hits: 1157
file icon DesignBuilder Printable Documentation v4 (Letter pages)
15.07.2015

Please bear in mind that there are over 800 pages before you decide to print this!

Hits: 174
file icon DesignBuilder v3 ISO 13790 and EN 15265 Validation Report
12.01.2015
Report on EN ISO 13790 Standard (2008) Tests for the calculation of energy use for space heating and cooling
Hits: 440
file icon ASHRAE 140 2011 Test Results for DesignBuilder v4.2
19.11.2014

ANSI/ASHRAE Standard 140-2011 Building Thermal Envelope and Fabric Load Tests Results for DesignBuilder v4.2 with EnergyPlus v8.1. Updated to include an Executive Summary on 19 Nov 2014.

Hits: 557
file icon DesignBuilder SBEM Manual v5.2.d
05.11.2014
DesignBuilder SBEM Manual describes the combination of the DesignBuilder graphical interface and the Simplified Building Energy Model (SBEM) that can be used for producing Energy Performance Certificates (EPCs) and BRUKL reports for showing compliance with Part L2 of the Building Regulations.
Hits: 411
file icon DesignBuilder SBEM Manual v4.1
24.01.2014
DesignBuilder SBEM Manual describes the combination of the DesignBuilder graphical interface and the Simplified Building Energy Model (SBEM) that can be used for producing Energy Performance Certificates (EPCs) and BRUKL reports for showing compliance with Part L2 of the Building Regulations.
Hits: 953
file icon DesignBuilder CFD validation against Pheonics
04.02.2011
Inter-model validation report comparing DesignBuilder CFD with the general purpose Pheonics CFD software. Report prepared by Northumbria University.
Hits: 1665
file icon 3TC Research Paper
18.10.2010
The algorithms behind the 3TC (3 Time Constant) lumped parameter simulation method used in DBSIm are described in detail.
Hits: 1084
file icon 3TC Research Report
18.10.2010
A report detailing some further development of the 3TC (3 Time Constant) simulation method used in DBSIm
Hits: 813

Latest News

DesignBuilder v4.7 is released!


DesignBuilder SBEM v4.7 approved for England and Scotland EPCs and Part-L2 / Section 6 2015

View webinar recording: Advanced EnergyPlus Modelling with EMS

Training