Search found 37 matches

Dear Sir,

I have just tried to simulate this building using DesignBuilder version v.1.4.0.056, just have a look what happens if I put insulation on the roof. The result shows that the zone sensibl ...

OK Andy,

I attached the model.

Thanks,
Rahmi

Andy,

Thanks for the suggestion.
I have tried to change the EP version for the new DB, and it gave the same result which means that when I do simulation using DB V.5.0.74, and using EP version 2.1 ...

Dear Sir,

I have just installed the newest version of DB, v.1.5.0.076, and simulated three different building models, then compare the results with previous version, v.1.4.0.056.
1. Case 600 ASHR ...

Hi Laurent,

Thanks for the explanation.
Concerning my last question, how to set the cooling machine so it works from 21.00 to 05.00? Do I have to set the Cooling Setback to (for example) 40°C? (to ...

Dear Sir,

I am simulating a building which is conditioned (cooling only) using daily schedule of 'ON' from 21.00 to 05.00.
I set (in the activity tab) the cooling set point temperature of 26°C a ...

Hi Carlos,

For your question concerning zone volume, maybe you can try to check the zone volume using Energy Plus.
Hopefully it helps.

Good luck,
Rahmi

Dear Sir,

I am now simulating a two storeys building, and I have a staircase connects between the storey. I draw a hole on the ceiling and assume this as the staircase. In my simulation, how do I k ...

Hi Arturo,

Thanks for the idea. Yesterday I also thought that it could be done like that. But, still I get stuck with the initial point.
1. Which comfort conditioning temperature should I use for ...

Hi Arturo,

May I ask, why did you put the ground temperature of 27°C? I'm now also have a problem, to define, what is actually Ground Temperature? and how we get the data of these?

Thanks
Rahm ...

Dear Linda,

Do you mind to give a short explanation about the example file 'GroundTempOSCCompactSched.idf'? I have open this file and simulated it using my weather data, but I don't understand how ...

Dear Linda,

Thanks for your explanation, however now I'm confused with my own simulation

. In my understanding, I need to do simulation using EnergyPlus by exporting my idf file. But, then which ...

Dear Andrew, Linda and Collinar,

Thanks a lot for your suggestion.
I have tried using CalcSoilSurfTemp Program, and simulate the weather data which has
- min temp : 21.4°C
- max temp : 35.2°C
- ...

Hi,

I am now doing simulation for a building in a tropical country. The weather type is very hot and humid. The building consists of 2 storeys, and for the ground floor, the floor material is cera ...

OK Mahabir,

I have checked it again, maybe I was wrong.
Thanks a lot.

Rahmi

Login