B84406
Posts: 1
Location: Appleton |
 Posted: Tue Jul 10, 2012 11:45 pm Post subject: Using DB 3.0 Trial and EnergyPlus 7.0.0.036 |
 |
|
I'm using DB again after being away from it for about 1 year. I have a trial v3 of DB and am using it with EnergyPlus 7.0.0.036. I imported a revit file and everything looks fine but when I try to run the simulation, I get many lines of errors for 3 different objects. The following is a sample:
Program Version,EnergyPlus-32 7.0.0.036, 7/10/2012 4:21 PM,IDD_Version 7.0.0.036
** Severe ** IP: IDF line~7898 Did not find "WATER)" in list of Objects
************* IDF Context for following error/warning message:
************* Note -- lines truncated at 280 characters, if necessary...
************* Only the comment character (!) on a line is shown -- nothing following that.
************* 7898 WATER), Surface Area: 4.5290
** Warning ** IP: IDF line~7898 Comma being inserted after:" Surface Area: 4.5290" in Object=WATER)
** Severe ** IP: IDF line~7914 Did not find "WATER)" in list of Objects
************* IDF Context for following error/warning message:
************* Note -- lines truncated at 280 characters, if necessary...
************* Only the comment character (!) on a line is shown -- nothing following that.
************* 7914 WATER), Surface Area: 4.5290
** Warning ** IP: IDF line~7914 Comma being inserted after:" Surface Area: 4.5290" in Object=WATER)
** Severe ** IP: IDF line~7930 Did not find "WATER)" in list of Objects
************* IDF Context for following error/warning message:
************* Note -- lines truncated at 280 characters, if necessary...
************* Only the comment character (!) on a line is shown -- nothing following that.
************* 7930 WATER), Surface Area: 7.5561
PLEASE SEE ATTACHED LIST OF ERRORS. I tried to open the idf file but it is blank. I'm pretty rusty at this stuff - any suggestions would be greatly appreciated! |
|
FAQ
Search
Log in to check your private messages
Usergroups
