Cooling design missing figures

koen25071979 · Posts: 35

Dear sir,

I have made a cooling design for a building with
VAV with HR + outside air reset.
I have installed the new version 1.4.0.014.
The cooling design graphs and tables don not show the
external mechanical ventilation.
I have looked at the details of the display options.
There it is marked to be viewed.

I have tried it with several mechanical ventilation options and it is never shown in the graphs or tables of the cooling design. In the heating design it is shown.

Could this be a bug???

I send you the dsb-file

Regards

Koen Gyselinck
Technum NV
Gent - Belgium

Andy Tindale · Posts: 1196 Location: Stroud

Dear Koen,

Do you see the blue Zone/Sys sensible cooling data? This is the sensible cooling effect on the zone of any air introduced into the zone through the HVAC system. It includes any 'free cooling' due to introduction of relatively cool outside air. Cooling always shows as a negative heat gain in the results. It is best considered as part of the zone heat balance.

Your file didn't upload - please wait until the upload is complete before leaving the page (it can take several minutes for large files). Alternatively email the file to info@...

Andy

koen25071979 · Posts: 35

Andy,

I have e-mailed the dsb-file to the support
e-mail adress.

Regards

Koen Gyselinck

Login