|
|
| View previous topic :: View next topic |
| Author |
Message |
Bobby Gilbert
Posts: 18
|
 Posted: Mon Mar 17, 2008 1:15 pm Post subject: Doors, holes, windows between blocks |
 |
|
I am adding a sunspace on to a main building. I have done this be creating them as seperate blocks. When I put a french window from the sunspace into the main building it only goes through the sunspace wall and not through the main building wall as well (it appears as a bricked up window).
Should I have made the whole building bigger and partitioned it instead of using 2 blocks?
I seem to get the same problem when I make a hole for a stairwell in a ground floor block ceiling. When I drop a first floor block on top, the hole does not appear in the floor. Do I have to make holes from both sides which seems fiddly or am I missing something?
Regards,
Bobby
PS What is the best way to search the support forum?
|
|
| Back to top |
|
 |
bhandari
Posts: 78
|
| Posted: Mon Mar 17, 2008 2:27 pm Post subject: |
|
|
Bobby,
There may be a small gap between the blocks. You should be able to create two block side by side. Try redrawing it.
The hole creation in ceiling should work fine. You do not need to create hole from both sides.
Mahabir
|
|
| Back to top |
|
|
Bobby Gilbert
Posts: 18
|
| Posted: Mon Mar 17, 2008 5:41 pm Post subject: |
|
|
| That seemed to do the trick. Thanks
|
|
| Back to top |
|
|
rahmiandarini
Posts: 43
|
| Posted: Tue May 06, 2008 1:58 pm Post subject: |
|
|
Dear Sir,
When I draw hole for staircase, I compared between drawing hole on one side only (ceiling of ground floor), and drawing holes on ceiling of ground floor as well as on the floor of first floor. I get two different results for these. How can it be?
Thanks,
Rahmi
|
|
| Back to top |
|
|
bhandari
Posts: 78
|
| Posted: Tue May 06, 2008 2:37 pm Post subject: |
|
|
Rahmi,
If the hole is created on the ceiling of the lower zone then it would automatically be created on the floor of the zone directly above. I am not sure how were you able to create another hole on top of another one. You may want to upload your models. .
thanks,
Mahabir
|
|
| Back to top |
|
|
rahmiandarini
Posts: 43
|
| Posted: Tue May 06, 2008 2:46 pm Post subject: |
|
|
Dear Mahabir,
I have tried to attach my model, however it does not work. Is there any suggestion?
Rahmi
|
|
| Back to top |
|
|
bhandari
Posts: 78
|
| Posted: Tue May 06, 2008 3:12 pm Post subject: |
|
|
Dear Rahmi,
It may be due to large file size. You can save the models without results - Go to File/Save/Save without Output results..
Mahabir
|
|
| Back to top |
|
|
rahmiandarini
Posts: 43
|
| Posted: Tue May 06, 2008 3:16 pm Post subject: |
|
|
OK,
I'll send it.
Thanks,
Rahmi
| Description: |
|
Download |
| Filename: |
Base Case Althia.dsb |
| Filesize: |
1.06 MB |
| Downloaded: |
270 Time(s) |
|
|
| Back to top |
|
|
bhandari
Posts: 78
|
| Posted: Tue May 06, 2008 4:53 pm Post subject: |
|
|
Rahmi,
The hole for staircase is the same (6.632 m2)for the ceiling of Lt.Dasar/Zone1 and for the floor of Lt.2/Zone 1. The layout also show the staircase in Green both on the floor and ceiling. So, I am not sure how were you able to create the hole on top of another hole of the same size. I may be missing the point here.
Mahabir
| Description: |
|
| Filesize: |
90.69 KB |
| Viewed: |
566 Time(s) |
|
|
|
| Back to top |
|
|
rahmiandarini
Posts: 43
|
| Posted: Tue May 06, 2008 9:01 pm Post subject: |
|
|
OK Mahabir,
I have checked it again, maybe I was wrong.
Thanks a lot.
Rahmi
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by p h p B B
|
|
Home
FAQ
Search
Log in to check your private messages
Usergroups
